Copy Link
Add to Bookmark
Report

SANctuary: Chain Lock Picking

eZine's profile picture
Published in 
SANctuary
 · 4 Jul 2020

  
(*)*(*)*(*)*(*)*(*)*(*)*(*)*(*)
* - Chain Lock Picking - *
(*) - Device - (*)
* --------------------- *
(*) by, Neutron SkyDiver! (*)
* --------------------- *
----====|| SANctuary ||====----

disclaimer:
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
( This document should be used for informational purposes only (hehe). )
) Don't try it (really!). As a matter o' fact teach it to others and (
( spread this phile around just so others know not to do it (ha ha ha!). )
) If you try this on any locks and get busted I can't be blamed because (
( I told you not to do it!!! (HAHAHAEHHEHEHEHOHOHHOHAHAHAH!!!!!!!!!) )
\________________________________________________________________________/
===============
==EXPLANATION==
===============
This file will describe one of many ways to pick a chain lock. A
chain lock is one of those locks, usually used in hotels and homes for added
security, that is connected to the wall by the door and strung across the
crack between the door (the side with the knob) and the wall. On the door
there is a track that the knob on the end of the chain slides in. When the
door is opened (with the lock locked) it is held back by the chain leaving
a minimal amount of room (3-4 in.) allowing things like an eye (to see who's
there), an arm (most arms), a gun, a small pipe bomb, etc... to get through.
This opening can be taken to YOUR advantage when you use the extremely simple
device I intend to teach you to make.

============
==CREATION==
============
When you read this part you will smack yourself and say 'That's easy!
Why didn't I think of that?'. The materials you need are as follows:
= A wire-frame coat hanger (the kind totally made of wire, not the
ones with that cardboard tube)
= Long-nose pliers (if you don't have any then hands MIGHT work)
= A chain lock to pick. (duh)
Now if you know how chain locks work you will realize that you can't
just squeeze your arm through the crack and release it, you must have the
door closed, or almost (about 1/4 in.) closed to slide it off the track.
So with the coat hanger you will slide it off. Now unravel the wire and
and make the coat hanger into a straight line with only those wiggley things
on the end. Then bend the coat hanger to look sorta like the diagram:

|~~~~||
Handle \/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ \
Catch--> ~)_______________________________________ /

And with the pliers bend the wiggley end (catch) of the line to this:

(~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__)

=========
==USAGE==
=========
Now the Catch is used to catch the knob on the end of the cain and
then push it out of the track. So the operation is simple, you just slip your
arm through the hole with the end with the catch in your hand. With your

[) PAGE BREAK FOR PRINTERS (]


=USAGE=CONT'D= pg. 2

fingers, try to hook the catch on to the ring of the chain that is connected
to the knob or even hook it to the knob itself. Then, close the door and
slide the device toward the hinges of the door and when it goes no farther
wiggle it a bit. Then push the handle toward the door to knock the knob out
of it's track. Now you simply open the door and the chain should not be
there anymore.

========
==TIPS==
========
When using this you might want to try different techniques in opening
the lock. You could tape it to the lock or connect a rubber band to the knob
then the other end of the band to the catch for maybe a wider movement range.
There are many things you might want to do to make it easier and by all means
improve it if you can and even sell it if you want. Also if you want to just
find a way to get in touch with me and suggest!

===========
==THE=END==
===========

/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
====================||||| SANctuary |||||====================================

Oi! Like to welcome our newest SANctuary writer Neutron SkyDiver!
He found some new info on Lockpicking. He has told me he was inspired
by Havok's SANlock series, and learned alot, and began writing on his own
now he's part of the SANctuary family. You can be part of SANctuary
too! If you have talents in P/H/C/A, ANSi or VGA art, or Programming,
E-mail Myself at

HELLFIRE BBS!!!
(908) 495-3926
SANctuary World HQ!

For all you Commie fan's set your modem to N-8-1

Greet's go out to:

Shoeman! Welcome to SANctuary Family!!!
Pieman, thank's for snubbing us! (only kidding) Havok, where's SAN
lock 3??? Guardian, keep'em coming! Max.. where's my damned Doc reader???
any other P/H/C/A groups in the known universe.....

WE ARE THE BEST!!!


----===Red===----
===============================================================================

← previous
next →
loading
sending ...
New to Neperos ? Sign Up for free
download Neperos App from Google Play
install Neperos as PWA

Let's discover also

Recent Articles

Recent Comments

Neperos cookies
This website uses cookies to store your preferences and improve the service. Cookies authorization will allow me and / or my partners to process personal data such as browsing behaviour.

By pressing OK you agree to the Terms of Service and acknowledge the Privacy Policy

By pressing REJECT you will be able to continue to use Neperos (like read articles or write comments) but some important cookies will not be set. This may affect certain features and functions of the platform.
OK
REJECT